AW 119
Need a specific AW 119 work aid? Provide us with a drawing and we can make it for you!

1/4 Inch Drive Metric Torque Adapters
P/N TORQMET
$110.00
This set of 1/4" drive torque adapters is like our SAE Torque adapters but in metric sizes.
This set consists of 6, 8, 10 and 13 mm. This was requested by an EC mechanic that indicated these were the most
common sizes. I have very little time on the metrics so you have to tell me what you need.
Other sizes are available up to 14mm.
Call or email with the size you need.
P/N TORQMET
$110.00
This set of 1/4" drive torque adapters is like our SAE Torque adapters but in metric sizes.
This set consists of 6, 8, 10 and 13 mm. This was requested by an EC mechanic that indicated these were the most
common sizes. I have very little time on the metrics so you have to tell me what you need.
Other sizes are available up to 14mm.
Call or email with the size you need.

Torque Adapters 1/4" Drive
P/N TORQADAPT
$110.00 4pc SET (1/4, 5/16, 3/8, & 7/16)
$35.00 ea
Hard to find 1/4" drive torque adapters. Most torque adapters you will find are 3/8" drive. These will allow you to use that low torque 1/4" torque wrench without the 3/8" to 1/4" adapter.
CONTACT US if you require a different size or length.
P/N TORQADAPT
$110.00 4pc SET (1/4, 5/16, 3/8, & 7/16)
$35.00 ea
Hard to find 1/4" drive torque adapters. Most torque adapters you will find are 3/8" drive. These will allow you to use that low torque 1/4" torque wrench without the 3/8" to 1/4" adapter.
CONTACT US if you require a different size or length.

Brass Screwdriver for Compass Adjustment
P/N BRASSCA
$23.00
No more trying to make a screw driver for adjusting compasses with a hammer and welding rod.
This is a quality, solid brass screwdriver made especially for adjusting compasses.
It's 4 3/4 inches long and the blade tip is 5/32" wide.
P/N BRASSCA
$23.00
No more trying to make a screw driver for adjusting compasses with a hammer and welding rod.
This is a quality, solid brass screwdriver made especially for adjusting compasses.
It's 4 3/4 inches long and the blade tip is 5/32" wide.

Bolt Extractor
P/N XPRESS
$175.00
This work aid lets you apply pressure to the bolt while applying penetrating lube. Once the bolt pops loose it can easily be removed. Works great on the many control bolts and bell cranks found throughout the aircraft.
P/N XPRESS
$175.00
This work aid lets you apply pressure to the bolt while applying penetrating lube. Once the bolt pops loose it can easily be removed. Works great on the many control bolts and bell cranks found throughout the aircraft.