Non-aircraft specific work aids
Swing Wrenches - Mechanic Favorites
P/N 716BSWING $60.00
P/N 3/8BSWING $60.00
P/N 516BSWING $60.00
Don't buy bulky swing wrenches from tool trucks made from the old ratcheting dog bone wrenches that were great 40 years ago. Ours are made with the slimmer profile Gearwrench ratcheting boxends. Rotor brakes, flight controls in the tailboom, or fuel controls will now be a breeze. Hundreds of other uses (home or work).
Contact us if you require a different size.
P/N 716BSWING $60.00
P/N 3/8BSWING $60.00
P/N 516BSWING $60.00
Don't buy bulky swing wrenches from tool trucks made from the old ratcheting dog bone wrenches that were great 40 years ago. Ours are made with the slimmer profile Gearwrench ratcheting boxends. Rotor brakes, flight controls in the tailboom, or fuel controls will now be a breeze. Hundreds of other uses (home or work).
Contact us if you require a different size.
Torque Adapters 1/4" Drive
P/N TORQADAPT
$110.00 4pc SET (1/4, 5/16, 3/8, & 7/16)
$35.00 ea
Hard to find 1/4" drive torque adapters. Most torque adapters you will find are 3/8" drive. These will allow you to use that low torque 1/4" torque wrench without the 3/8" to 1/4" adapter.
Contact us if you require a different size or length.
P/N TORQADAPT
$110.00 4pc SET (1/4, 5/16, 3/8, & 7/16)
$35.00 ea
Hard to find 1/4" drive torque adapters. Most torque adapters you will find are 3/8" drive. These will allow you to use that low torque 1/4" torque wrench without the 3/8" to 1/4" adapter.
Contact us if you require a different size or length.
Slide Hammer
P/N SLAMMER
$60.00 w/ assorted threaded bolts
This slide hammer was made for the 206 cartridge with extra adapters for other applications. Shorter than commercial slides to pop out fuel pump cartridges in the belly when there is little ground clearance available.
Specify what size and thread needed. Bell 206 cartridges are 7/16 x 20 thread.
P/N SLAMMER
$60.00 w/ assorted threaded bolts
This slide hammer was made for the 206 cartridge with extra adapters for other applications. Shorter than commercial slides to pop out fuel pump cartridges in the belly when there is little ground clearance available.
Specify what size and thread needed. Bell 206 cartridges are 7/16 x 20 thread.
Bolt Extractor
P/N XPRESS
$175.00
This work aid lets you apply pressure to the bolt while applying penetrating lube. Once the bolt pops loose it can easily be removed. Works well on the many control bolts found throughout the aircraft.
P/N XPRESS
$175.00
This work aid lets you apply pressure to the bolt while applying penetrating lube. Once the bolt pops loose it can easily be removed. Works well on the many control bolts found throughout the aircraft.
Big A$$ Screwdriver
P/N BIGSCREW
$50.00
The shaft is 14-15 inches long. The handle is about 5" long and is made from 1 1/2 inch knurled aluminum. There is a 9/16" nut welded to the shaft right next to the handle. You can put extra torque on it with a 9/16" wrench.
There is also a hole drilled in the handle so you can use a rivet gun if the screw is stuck big time. If this won't get the screw out, you probably need to start drilling because it just isn't coming out.
P/N BIGSCREW
$50.00
The shaft is 14-15 inches long. The handle is about 5" long and is made from 1 1/2 inch knurled aluminum. There is a 9/16" nut welded to the shaft right next to the handle. You can put extra torque on it with a 9/16" wrench.
There is also a hole drilled in the handle so you can use a rivet gun if the screw is stuck big time. If this won't get the screw out, you probably need to start drilling because it just isn't coming out.
Thread Detector
P/N 404-0002
$35.00
A collection of male and female threads in SAE and Metric. If you are not well versed in thread identification, this is the item you have been looking for.
P/N 404-0002
$35.00
A collection of male and female threads in SAE and Metric. If you are not well versed in thread identification, this is the item you have been looking for.
