Bell 212

212/412 Gearbox Drain
P/N 212/412IGB
$85.00
205/212/412 90* and 42* gearbox drain.
P/N 212/412IGB
$85.00
205/212/412 90* and 42* gearbox drain.

PT6 C/Box Drain
P/N 212CBOX
$85.00
Old style PT6 chip plug for the 212's
I haven't seen a 212 in such a long time maybe some one could enlighten me as to what the 212 is using now. I'm a one man operation so I can't keep up with everything.
P/N 212CBOX
$85.00
Old style PT6 chip plug for the 212's
I haven't seen a 212 in such a long time maybe some one could enlighten me as to what the 212 is using now. I'm a one man operation so I can't keep up with everything.

206 Pitch Horn Spreader
P/N 206PHS
$125.00
From Bell specs, use it to spread the pitch horn and remove the trunnion fittings as per Bell maintenance manual.
P/N 206PHS
$125.00
From Bell specs, use it to spread the pitch horn and remove the trunnion fittings as per Bell maintenance manual.

Torque Adapters 1/4" Drive
P/N TORQADAPT
$110.00 4pc SET (1/4, 5/16, 3/8, & 7/16)
$35.00 ea
Hard to find 1/4" drive torque adapters. Most torque adapters you will find are 3/8" drive. These will allow you to use that low torque 1/4" torque wrench without the 3/8" to 1/4" adapter.
CONTACT US if you require a different size or length.
P/N TORQADAPT
$110.00 4pc SET (1/4, 5/16, 3/8, & 7/16)
$35.00 ea
Hard to find 1/4" drive torque adapters. Most torque adapters you will find are 3/8" drive. These will allow you to use that low torque 1/4" torque wrench without the 3/8" to 1/4" adapter.
CONTACT US if you require a different size or length.

Brass Screwdriver for Compass Adjustment
P/N BRASSCA
$23.00
No more trying to make a screw driver for adjusting compasses with a hammer and welding rod.
This is a quality, solid brass screwdriver made especially for adjusting compasses.
It's 4 3/4 inches long and the blade tip is 5/32" wide.
P/N BRASSCA
$23.00
No more trying to make a screw driver for adjusting compasses with a hammer and welding rod.
This is a quality, solid brass screwdriver made especially for adjusting compasses.
It's 4 3/4 inches long and the blade tip is 5/32" wide.

Bolt Extractor
P/N XPRESS
$190.00
This work aid lets you apply pressure to the bolt while applying penetrating lube. Once the bolt pops loose it can easily be removed. Works great on the many control bolts and bell cranks found throughout the aircraft.
P/N XPRESS
$190.00
This work aid lets you apply pressure to the bolt while applying penetrating lube. Once the bolt pops loose it can easily be removed. Works great on the many control bolts and bell cranks found throughout the aircraft.

Thread Detector
P/N 404-0002
$35.00
A collection of male and female threads in SAE and Metric. If you are not well versed in thread identification, this is the item you have been looking for. Something that should be in every mechanic's toolbox.
P/N 404-0002
$35.00
A collection of male and female threads in SAE and Metric. If you are not well versed in thread identification, this is the item you have been looking for. Something that should be in every mechanic's toolbox.