Bell 412

412 Torque Transducer Tube & Wedge Remover
P/N 412TTT
$215.00
Used to remove the torque transducer tube and wedge.
P/N 412TTT
$215.00
Used to remove the torque transducer tube and wedge.

412 Collective Drill Jig For TB412-00-166
P/N 412JIG
$375.00
This drill jig is to comply with TB412-00-166. The TB requires you to drill a 1/16" hole sideways into the collective through the aluminum portion of the throttle. The bottom shows a sample piece of aluminum drilled using the jig to check out and show that it would do what the TB required.
P/N 412JIG
$375.00
This drill jig is to comply with TB412-00-166. The TB requires you to drill a 1/16" hole sideways into the collective through the aluminum portion of the throttle. The bottom shows a sample piece of aluminum drilled using the jig to check out and show that it would do what the TB required.


212/412 Tailrotor and 42° Gearbox Drain
P/N 212/412IGB
$85.00
T/R and I/G/B drain.
P/N 212/412IGB
$85.00
T/R and I/G/B drain.

PT6 C/Box Drain
P/N 212CBOX
$85.00
Old style c/box drain. This is the one that is threaded into the chip plug receptacle. The new 412 is a bayonet style. You can see it below.
P/N 212CBOX
$85.00
Old style c/box drain. This is the one that is threaded into the chip plug receptacle. The new 412 is a bayonet style. You can see it below.

212/412 C/Box Drain Bayonet Style
P/N 412CBOXB
$85.00
P&W changed the chip plug and went to this style.
P/N 412CBOXB
$85.00
P&W changed the chip plug and went to this style.

412 EPI 42 & 90 Degree Tailrotor Gearbox Drain
P/N 412EPI
$85.00
P/N 412EPI
$85.00

Torque Adapters 1/4" Drive
P/N TORQADAPT
$110.00 4pc SET (1/4, 5/16, 3/8, & 7/16)
$35.00 ea
Hard to find 1/4" drive torque adapters. Most torque adapters you will find are 3/8" drive. These will allow you to use that low torque 1/4" torque wrench without the 3/8" to 1/4" adapter.
CONTACT US if you require a different size or length.
P/N TORQADAPT
$110.00 4pc SET (1/4, 5/16, 3/8, & 7/16)
$35.00 ea
Hard to find 1/4" drive torque adapters. Most torque adapters you will find are 3/8" drive. These will allow you to use that low torque 1/4" torque wrench without the 3/8" to 1/4" adapter.
CONTACT US if you require a different size or length.

Brass Screwdriver for Compass Adjustment
P/N BRASSCA
$23.00
No more trying to make a screw driver for adjusting compasses with a hammer and welding rod.
This is a quality, solid brass screwdriver made especially for adjusting compasses.
It's 4 3/4 inches long and the blade tip is 5/32" wide.
P/N BRASSCA
$23.00
No more trying to make a screw driver for adjusting compasses with a hammer and welding rod.
This is a quality, solid brass screwdriver made especially for adjusting compasses.
It's 4 3/4 inches long and the blade tip is 5/32" wide.

Bolt Extractor
P/N XPRESS
$190.00
This work aid lets you apply pressure to the bolt while applying penetrating lube. Once the bolt pops loose it can easily be removed. Works great on the many control bolts and bell cranks found throughout the aircraft.
P/N XPRESS
$190.00
This work aid lets you apply pressure to the bolt while applying penetrating lube. Once the bolt pops loose it can easily be removed. Works great on the many control bolts and bell cranks found throughout the aircraft.

Thread Detector
P/N 404-0002
$35.00
A collection of male and female threads in SAE and Metric. If you are not well versed in thread identification, this is the item you have been looking for. Something that should be in every mechanic's toolbox.
P/N 404-0002
$35.00
A collection of male and female threads in SAE and Metric. If you are not well versed in thread identification, this is the item you have been looking for. Something that should be in every mechanic's toolbox.