Shop by Make & Model

  • 206L/407/429 Portable Hydraulic Pump Drive Unit 206L/407/429 Portable Hydraulic Pump Drive Unit 206L/407/429 Portable Hydraulic Pump Drive Unit

    206L/407/429 Portable Hydraulic Pump Drive Unit

    FOR CUSTOMERS OUTSIDE OF THE UNITED STATES PLEASE CLICK HERE   Remove the hydraulic pump from the transmission with the hoses still connected and bolt hydraulic pump to the red pump drive unit. Plug in the Makita to 110v, and presto, you have...

    $4,750.00
  • Rolls-Royce 250 Fuel Nozzle Shimming Gauge Rolls-Royce 250 Fuel Nozzle Shimming Gauge Image of our fuel nozzle shimming calculator. Email us for the excel file.

    Rolls-Royce 250 Fuel Nozzle Shimming Gauge

    The simplest gauge for calculating the required shims for the fuel nozzle!  We provide instructions that are for reference, but as usual, refer to maintenance manual for latest information.   We also have an excel spreadsheet to make...

    $275.00 - $370.00
  • Rolls-Royce 250 C30/C47 Fuel Nozzle Wrench Rolls-Royce 250 C30/C47 Fuel Nozzle Wrench Rolls-Royce 250 C30/C47 Fuel Nozzle Wrench Rolls-Royce 250 C30/C47 Fuel Nozzle Wrench

    Rolls-Royce 250 C30/C47 Fuel Nozzle Wrench

    This fuel nozzle wrench is double sided to give you better access to the fuel nozzle. With the cowling installed, if you place the wrench on the fuel nozzle, it may not sit the way you want because of the limited space, flip it to the other side. The...

    $110.00
  • 206/505 Blade Pin Press

    206/505 Blade Pin Press

    No longer will you need to waste time with a stuck pin.  Once you decide the pin is stuck, place the pin press around the grip with the large hole around the top of the pin. (The tool is upside down in the pictures) Reinstall the bottom plate (the...

    $725.00
  • 206B Bleed Valve Block 206B Bleed Valve Block 206B Bleed Valve Block

    206B Bleed Valve Block

    Color varies when manufactured Bleed valve block for Rolls-Royce C20 engine with strap so that it can be hung. Rolls-Royce P/N 6886204

    $38.00
  • Bolt Extractor Bolt Extractor Bolt Extractor Bolt Extractor Bolt Extractor

    Bolt Extractor

    This work aid lets you apply pressure to the bolt while applying penetrating lube. Once the bolt pops loose it can easily be removed. Pressure is applied to the bolt and not to the tail boom fitting. Cracked fittings require tail boom removal at lots of...

    $225.00
  • 206 Mast Stand Adapter

    206 Mast Stand Adapter

    This adapter was made to fit inside of 2” galvanized pipe. Can be machined to fit in your stand. Please give us the size of the pipe you plan on using in the comments on checkout. If you need a mast stand for your 206L and don't have a scrap mast...

    $230.00
  • 206 Tail Rotor Rigging Work Aid 206 Tail Rotor Rigging Work Aid 206 Tail Rotor Rigging Work Aid 206 Tail Rotor Rigging Work Aid

    206 Tail Rotor Rigging Work Aid

    Color varies when manufactured Made from PLA. Light and soft to protect tail rotor blades.Much lighter than the factory tool made from steel. Cheap enough you can purchase 2 pieces like Bell suggests in the maintenance manual to speed up the job. This...

    $245.00
  • Rolls-Royce C30/C47 Engine Lifting Eye

    Rolls-Royce C30/C47 Engine Lifting Eye

    Engine lifting eye for C30 and C47. Long enough to clear the exhaust stack so it doesn't have to be removed. There are 3  3/8-24 threaded holes so the bolts can be stored when not in use. Rolls-Royce C20 6796963Rolls-Royce C30/C47...

    $335.00
  • OH58 Main Transmission Drain

    OH58 Main Transmission Drain

    ​This is the main gearbox drain hose for the OH58. Pull your chip plug where you want to drain the transmission and check to see if it is the long or short style.  Also check to see if the drain has 3 pins or 3 slots ​for engaging and locking into...

    $95.00
  • Slide Hammer Slide Hammer Slide Hammer Slide Hammer Slide Hammer

    Slide Hammer

    Shorter than commercial slides to pop out fuel pump cartridges in the belly when there is little ground clearance available.Comes with 7/16 20 and a 1/4 28 thread adapters.

    $90.00
  • Bypass Spool Check Mount - With Dial Indicator Bypass Spool Check Mount - With Dial Indicator Bypass Spool Check Mount - With Dial Indicator Bypass Spool Check Mount - With Dial Indicator

    Bypass Spool Check Mount - With Dial Indicator

    Bracket held on with nylon screws so as not to damage the servo anodized surface.The bracket also comes with a powder coat finish which gives additional protection to the anodized finish on the servo.   Comes with spare nylon screw.   If...

    $80.00 - $255.00
  • Rolls-Royce 250 Ignitor Wrench Ignitor wrench installed and ready to whack with a hammer. This is an actual picture of the wrench in use. One whack with the hammer and this was a done deal. This ignitor came right out

    Rolls-Royce 250 Ignitor Wrench

    Ignitors can be hard to remove for several reasons. Someone put it in too tight, didn't use anti-seize or used a 12 point socket and slipped, rounding off the corners. This wrench is made from a 6 point impact socket. Install the wrench and put the...

    $65.00
  • 206 & 407 Free Wheeling Unit Aft Flange Wrench 206 & 407 Free Wheeling Unit Aft Flange Wrench

    206 & 407 Free Wheeling Unit Aft Flange Wrench

    Use this work aid by attaching it to the aft flange with two bolts. Use a breaker bar to keep shaft from rotating. Through the larger centered hole, use your socket to torque the nut. We can make the square drive hole 1/2in if you prefer.   Bell P/N...

    $85.00
  • Rolls-Royce C20 Engine Lifting Eye

    Rolls-Royce C20 Engine Lifting Eye

    Engine lifting eye for C20 Long enough to clear the exhaust stack so it doesn't have to be removed.   There are 3 3/8-24 threaded holes so the bolts can be stored when not in use.   Rolls-Royce P/N C20 6796963 Rolls-Royce P/N C30/C47 6889888

    $335.00
  • Reversible Swing Wrenches Reversible Swing Wrenches

    Reversible Swing Wrenches

    These reversible swing wrenches are an improvement over our other wrenches. We are using the reversible Gear wrench brand so when you get into a tight spot and can't get the wrench off the nut or bolt you can simply flip the reversing lever and back out...

    $95.00 - $105.00
  • Brass Screwdriver For Compass Adjustment

    Brass Screwdriver For Compass Adjustment

    No more trying to make a screw driver for adjusting compasses with a hammer and welding rod.This is a quality, solid brass screwdriver made especially for adjusting compasses.It's 4 3/4 inches long and the blade tip is 5/32" wide.

    $23.00
  • Big A$$ Screwdriver Big A$$ Screwdriver Big A$$ Screwdriver Big A$$ Screwdriver Big A$$ Screwdriver

    Big A$$ Screwdriver

    The shaft is 14-15 inches long. The handle is about 5" long and is made from 1 1/2 inch knurled aluminum. There is a 9/16" nut welded to the shaft right next to the handle. You can put extra torque on it with a 9/16" wrench. There is also a hole drilled...

    $65.00
  • 206 Tail Rotor Balance Wheel Adapter 206 Tail Rotor Balance Wheel Adapter

    206 Tail Rotor Balance Wheel Adapter

    No longer will you have to use a flathead screwdriver and mallet to unscrew the balance wheel.   Can also be used for torquing when the 1/4" drive cutouts on the balance wheels are worn and won't hold the torque wrench.

    $40.00
  • 206 Knurl Nut Wrench 206 Knurl Nut Wrench

    206 Knurl Nut Wrench

    This will easily remove that stuck knurl nut. It is especially great if you want to replace the knurl nut liner and don't want to ruin the knurl nut with channel locks because the knurl nut is frozen.

    $130.00
  • 206 Tail Rotor Flap Stop Work Aid 206 Tail Rotor Flap Stop Work Aid 206 Tail Rotor Flap Stop Work Aid 206 Tail Rotor Flap Stop Work Aid 206 Tail Rotor Flap Stop Work Aid

    206 Tail Rotor Flap Stop Work Aid

    This item is 3D printed, made out of PLA. Color may vary. This work aid was designed to replace the Bell designed fork shaped lockout work aid. The 206 tail rotors are shimmed between the tailrotor hub and flap stop. That means every tailrotor is...

    $195.00
  • KaFlex Compression Kit for 206L and 407 KaFlex Compression Kit for 206L and 407

    KaFlex Compression Kit for 206L and 407

    This is the easiest and fastest way to R&R 206L and 407 KaFlex shafts.Simply make 2 wraps on the driveshaft passing through the holes in the aluminum rods, tie a knot and twist the rods until the cord starts to tighten. Tighten just enough to slip...

    $120.00
  • Swing Wrenches

    Swing Wrenches

    Don't buy bulky swing wrenches from tool trucks made from the old ratcheting dog bone wrenches that were great 40 years ago. Ours are made with the slimmer profile Gearwrench ratcheting boxends. Rotor brakes, flight controls in the tailboom, or fuel...

    $85.00 - $95.00
  • Rolls-Royce 250 Idle Adjustment Swing Wrench Rolls-Royce 250 Idle Adjustment Swing Wrench Rolls-Royce 250 Idle Adjustment Swing Wrench

    Rolls-Royce 250 Idle Adjustment Swing Wrench

    This swing wrench is made specifically for adjusting the idle on the 206 RR250 engine. Of course with that in mind, you can also use it for any tight spot that requires a 1/4" box end wrench. We have 2 types of swing wrenches. Our version and Helitools'...

    $85.00
  • Composite Tap Hammer Composite Tap Hammer Composite Tap Hammer Composite Tap Hammer

    Composite Tap Hammer

    Use the tap hammer on main rotor blades or any other composite material to check for delamination.   You can order somewhere else for $15 + $12 shipping ($27 total) or just bundle with your next order with us.   Equivalent to T75449-2

    $24.00
  • Grease Fitting - 90°

    Grease Fitting - 90°

    These are the threaded ones, not the quick disconnect ones that get grease everywhere except the part you want it in.

    $20.00
  • 90° Grease Coupler 90° Grease Coupler

    90° Grease Coupler

    I recently found this 90 degree grease coupler that works great on hard to access grease fittings.Works really well on the oil cooler blower bearings on the Bell 407. It slides in from the side when straight on access is difficult or next to impossible.

    $16.00
  • Swashplate Shim Alignment Studs Swashplate Shim Alignment Studs

    Swashplate Shim Alignment Studs

    Holds the shims in position when doing the swashplate friction check. The hex head is 5/32" drive.An allen wrench is easier to get in to tight areas than a long phillips screwdriver. Can also be used as jack screws on the 206 and 407 transmission input...

    $20.00