MD500 Collective Bungee Tool I'll let the maintenance manual explain it: The collective bungee installation tool prevents rapid,uncontrolled movement of the collective which could damage the flight controls and cause injury to personnel. ST508 MSRP: Was: Now: $300.00 Add to Cart
Torque Adapters 1/4" Drive Hard to find 1/4" drive torque adapters. Most torque adapters you will find are 3/8" drive. These will allow you to use that low torque 1/4" torque wrench without the 3/8" to 1/4" adapter. SAE: The standard set consists of 1/4", 5/16", 3/8", &... MSRP: Was: Now: $50.00 - $170.00 Choose Options
MD500 Tail Rotor Pitch Bearing Installer Specify which installer you need according to the bearing P/N's shown above. MSRP: Was: Now: $125.00 Choose Options
MD500 SWASHPLATE GREASE PLATE Designed with 4 grease zerks to make greasing the swashplate quicker and easier than other work aids out there. MSRP: Was: Now: $465.00 Add to Cart
MD500 Main Rotor Upper Scissor Crank Bearing R&R R&R main rotor scissor crank bearing without wasting time trying to find sockets and bolts to press the bearing in and out. It has been brought to my attention that after several bearings have been changed that the bore tends to... MSRP: Was: Now: $60.00 Add to Cart
MD500 Main Rotor Lower Scissor Crank Bearing R&R R&R the lower scissor crank bearing. This consists of installer and remover for the lower scissor. Due to the tight outer ear we had to make a fitting to clear the curved edge when installing the bearing.Removal only requires the receiver and bolt. MSRP: Was: Now: $95.00 Add to Cart
MD500 Main Rotor P/C Link Trammel Adjustable trammel for the MD500 p/c links. This may fit other MD products.One bolt is 5/16" and the opposite end is 1/4".Distance between bolts is about 6 3/8" with plenty of adjustment remaining. MSRP: Was: Now: $425.00 Add to Cart
MD369/500 Tail Rotor Rigging Gauge Color varies when manufactured 3D Printed, made from PLA. Gauge for rigging tail rotor on 369/500. MSRP: Was: Now: $45.00 Add to Cart
